すぺしゃのピーフィックス

こいつぁあ~第二弾ということでこれ。

遂に来ましたか。
影で言われてきた「Specialized P.Fix Trick Bike」

pfix_1.jpeg

pfix_3.jpeg

pfix_4.jpeg

pfix_5.jpeg

まぁ~あれですよね。
完全MTBですよね…
しかしハブはあの例のボルト止め式コグでこれまた前のスプロケも25T。
コンプリートで$880だそうで。

タイヤも2.2はいてるからリアの確保で25T以上ははいらんかもね。
んでハブはボルト式にくわえて14mmシャフト。

これどうなんかね?やっぱ重いかね?
クランクも175mm…まぁギア比のこと考えたらそうなるか…

いや~でもここまでスローピングはな~…

とりあえず詳細

FRAME: P. Series double butted Reynolds 520, FGFS geo, singlespeed-specific, integrated headset, MID BB shell, 3D-forged horizontal dropouts, removable "U" brake bosses, w/ integrated chain tensioners

FORK: Hi-Ten tapered and butted Cr-Mo blades, 1-1/8" threadless, 5mm dropouts for 3/8" axle

HEADSET: Integrated 1-1/8" threadless, Campy-style, full cartridge bearings

STEM: P. Series drop type, forged alloy, front load w/ CNC side holes, black hardware, 22.2mm

HANDLEBARS: Butted Cr-Mo riser bar, 75mm rise, 8º backsweep, 2º upsweep, 22.2mm

GRIPS: P. Grip, flanged soft compound, open end w/ endplug, 150mm

REAR BRAKE: Tektro U-brake, alloy, soft compound pads

BRAKE LEVERS: Alloy "V"-brake, two-finger, linear pull

CASSETTE: Singlespeed, convertible fixed/freewheel, 10t

CHAIN: KMC Z510XRB, 1/2" x 1/8", heavy duty, anti-drop inner links

CRANKSET: 3pc. tubular, heat-treated Cr-Mo for 48 spline, 175mm length

CHAINRINGS: CNC cut 6061, 25T, Motostar design

BOTTOM BRACKET: MID BB, 2x sealed cartridge bearing w/ 19mm, 8-spline spindle, alloy tube, and cone spacers

PEDALS: P. Lo Pro nylon platform w/ molded pins, loose ball, 9/16", w/retention straps

RIMS: P. 26, alloy double-wall, 36mm, pinned, 36h

FRONT HUB: Mid-flange, 2x sealed cartridge bearing, 3/8" forged female bolt-in axles w/ 7075 alloy inner axle, 36h

REAR HUB: Rear hub, convertible fixed/freewheel cog driver cassette, 4x sealed cartridge bearing, CNCd 10t cog driver, hollow 14mm Cr-Mo axle, 23mm contact, 17mm axle nuts, 36h

SPOKES: Stainless, 2.0mm (14g)

FRONT TIRE: Specialized Compound Control, 60 TPI, aramid bead, 26x 2.2"

REAR TIRE: Specialized Compound Control, 60 TPI, aramid bead, 26x 2.2"

INNER TUBES: Schrader valve

SADDLE: P. Series, 1pc co-molded composite saddle and alloy seat post combination, w/ embossed "P. Series" logo padded cover

SEATPOST: Alloy, 25.4mm, no offset

SEAT BINDER: Integrated Cr-Mo bolt and nylock nut



ん~どうでしょう?
スポンサーサイト

Comment

Comment Form
公開設定

Trackback


→ この記事にトラックバックする(FC2ブログユーザー)
上記広告は1ヶ月以上更新のないブログに表示されています。新しい記事を書くことで広告を消せます。